Almost every time we go out, we can see street light poles, especially at night. Their widespread application makes it convenient for us to travel at night. So what are the requirements for them in production? Friends who don't know, come with me to learn more:
1. The street lamp post is made of hot-dip galvanized inside and outside, anti-corrosion spray coating, with a bright and smooth surface, without bumps, stains, and fading, and resistant to wind force of more than ten levels.
2. Light pole height of 10m, upper diameter Ф 75mm, lower diameter: Ф 175mm, wall thickness not less than 4mm; The flange thickness shall not be less than 18mm, and the flange specification size shall be consistent with the size of the pre embedded bolts. The top of the upright pole shall be made of stainless steel balls, and the lamp pole shall be rolled and welded in one go. The weld seam shall be uniform and flat, and there shall be no defects such as pores, slag inclusion, or missed welding; The reinforcement height of the weld seam shall not exceed 2mm, and the pipe opening shall be smooth and free of burrs.
3. The length of the lamp arm is 1.2m, and the arm is Ф Composed of 60 steel pipes.
4. The maintenance free internal foam replacement structure has good waterproof and dustproof functions, and the platform operation of lifting the cover is convenient for maintenance.
5. The size of the flange structure is based on the size of the road lamp foundation, and the installation of the lamp post should ensure safe grounding.
6. Protection level against electric shock: Class I.
If we want to improve the performance and quality of street lamp posts and make our lives more convenient, then we must strictly follow the above requirements in production. Only in this way can we ensure the performance and quality of street lamp posts, and at the same time, reduce the output of defective products and lower production costs!